Cordless Pole Chainsaw and Pole Hedge Trimmer pack
19
•
Beware of overhead power lines.
•
Avoid operating while people, especially children are nearby.
•
Dress properly! Do not wear loose clothing or jewellery which can be caught in moving parts. Use of sturdy
gloves, non-skid footwear, and safety glasses is recommended.
•
If the tool stalls, immediately switch it off. Remove the battery before attempting to remove any obstructions.
•
Remove the battery before checking, maintenance or working on the tool.
•
While operating the tool be always sure of a safe and secure operating position especially when using steps
or a ladder.
•
Do not attempt to repair the tool.
•
Do not operate the tool with a damaged or excessively worn cutting device.
•
Always wear ear protection, goggle and helmet during operating.
•
Always ensure that all guards are fitted when using the tool. Never attempt to use an incomplete tool or a
tool with unauthorized modifications.
•
Always use two hands to operate the tool.
•
When transporting or storing the tool always fit the blade sheath.
•
Always be aware of your surroundings and stay alert for possible hazards that you may not hear due to the
noise of the tool.
•
Do not carry the tool with your hands on the switch unless the battery has been removed.
•
If you have not used a hedge trimmer before, preferably seek practical instruction by an experienced user in
addition to studying this manual.
•
Never touch the blades while the tool is running.
•
Never attempt to force the blades to come to a standstill.
•
Do not put the tool down until the blade have come to a complete standstill.
•
Regularly check the blades for damage and wear. Do not use the machine when the blades are damaged.
•
Take care to avoid hard objects (e.g. metal wire, railings) when trimming. Should you accidentally hit any
such object immediately switch the tool off and check for any damage.
•
Should the tool start to vibrate abnormally, immediately switch it off and check for any damage.
•
Always be aware of falling debris when cutting the higher sides of a hedge.
•
Be aware of the cutting blade, always wear gloves to protect your hands from cut.
•
When the machine is working, the hand must not exceed the guard or come into contact with the blade. See
the
section.
•
When the machine is working, do not adjust the angle of the head.
Electrical Safety
•
Your charger has designed for a specific mains voltage. Always check that the mains voltage corresponds to
the voltage on the rating plate.