Cordless Line Trimmer
3
Set-Up
Guard Installation
1. Remove two screws from the motor housing.
2. Slide guard over motor housing (FIG. 1).
3. Re-insert two screws into the guard and tighten (FIG. 2).
Attach Adjustable Handle
Refer to FIG. 3.
1. Turn the handle knob and Draw out the bolt from the adjustable handle.
2. Insert the adjustable handle in the machine handle.
3. Insert the bolt and handle knob, then turn the handle knob lightly tighten.
4. Before tightening completely, turn the adjustable handle in desired angle. When adjustable handle is in
desired angle, tighten the handle knob securely.
