For your safety
Syscompact 2000 M pro
10 / 98
822-175-2
All BAUR devices and systems are reliable and are manufactured as per state-of-the-art
technology. The individual parts and the finished devices are subject to continuous testing by
our qualified personnel as part of our quality assurance system. Each device is fully tested
before delivery.
However, the operational safety and reliability in practice can be achieved only when all
necessary measures have been taken. The responsible body
of the device or
system are responsible for planning these measures and monitoring their implementation.
Before operating the device or system you should read and understand this user manual and
the user manuals of all integrated devices.
2.1 Intended use
The portable Syscompact 2000 M pro cable fault location system is used for cable fault
location and cable testing in low- and medium-voltage cables up to 65 km length.
If the system is not used in accordance with this stipulation, safe operation cannot be
guaranteed. The user is liable for any damage to persons and property resulting from incorrect
operation!
Proper use also includes
compliance with all instructions in this user manual, and all other applicable documents,
compliance with the technical data and connection requirements given on the rating plate
and in the user manual and any other applicable documents,
compliance with the inspection and maintenance instructions for the system and its
components.
2.2 Instructions for the operator
The product may be operated only by authorised and trained electrical engineers. An electrical
engineer is a person who, owing to his professional education (electrical engineering),
knowledge, experience and familiarity with the applicable standards and regulations, can
assess the tasks assigned to him and detect possible dangers.
In addition, the operator must have:
Knowledge of the technical equipment and operation of the product
Knowledge of the testing and measurement procedures
Knowledge of plant engineering (cable types, switchgear, etc.).
1
Responsible body is the person or group that is responsible for the safe operation of the device and its
maintenance (EN 61010-1, 3.5.12).
2
Operator is the person who uses the device for its intended purpose (according to the definition of user in
compliance with EN 61010-1, 3.5.11).
2
F
OR YOUR SAFETY
Summary of Contents for Sys compact 2000 M pro
Page 97: ......
