Owner‘s manual
36
6.10.3. Procedure to be followed when replacing a gas bottle
Caution
»
/FWFSESPQBHBTDZMJOEFS%VSJOHUSBOTQPSUUIFWBMWFTPGUIFHBTCPUUMFTNVTUCFQSPUFDUFE
by caps.
»
6TFBTQFDJBMWFIJDMFGPSUSBOTQPSUBUJPOPGUIFTFCPUUMFT"MXBZTGBTUFOBOEMPDLHBTCPUUMFT
in place.
»
$MPTFUIFBGUTBMPPOTMJEJOHEPPSUJHIUXIFOFYDIBOHJOHCPUUMFTFOTVSFHPPEWFOUJMBUJPO
Danger
» Be sure that all gas in the system has been burnt off before opening the valve at the cylin-
ders head.
»
"MXBZTXBJUVOUJMUIFnBNFIBTHPOFPVUDPNQMFUFMZPOMZUIFOXJMMUIFMJOFCFXJUIPVU
pressure.
» If gas does leak whilst the valve at the cylinder is closed and the pressure reducer is not
mUUFEUIFOUIFWBMWFJTQSPCBCMZEBNBHFE
»
*GUIJTJTUIFDBTFSFQMBDFUIFSFHVMBUPSJNNFEJBUFMZUPTUPQMFBLBHFUIFODBMMBMPDBMHBT
TVQQMJFS/FWFSEJTDPOOFDUSFHVMBUPSJGnBNFTUBZTMJU
The procedure of changing a gas bottle in single steps:
» Turn off the gas consumers and the engine.
» Turn the valve or switch located on the bottle/ cylinder itself.
»
%JTDPOOFDU UVSOUIFQSFTTVSFSFHVMBUPSGSPNUIFCPUUMF%PPOMZVTFBQQSPQSJBUFUPPMTJOPSEFSOPUUPEBNBHFUIF
mUUJOHT
»
'JUUIFQSPUFDUJWFDBQQSPNQUMZPOUIFFNQUZCPUUMF
»
3FNPWFUIFQSPUFDUJWFDBQGSPNUIFmUUJOHPGUIFOFXHBTCPUUMF
» Loosen the empty bottle and take it out of the tray/box.
» Place the new bottle in the tray/box and fasten it securely.
» Check the connection thread for defects.
» Place the cap nut carefully and fasten hand-tight. Please observe that threads of gas installations often use
EJGGFSFOUUISFBEUZQFToEJSFDUJPOTàà
»
'BTUFOUIFDBQOVUXJUIBOBQQSPQSJBUFUPPMBOEDIFDLGPSMFBLT
»
$IFDLBMMDPNQPOFOUTBHBJOPOMZUIFOPQFOUIFWBMWFBUUIFSFHVMBUPS
» Check the tightness of the system by reading the manometer. The manometer shall not display any pressure drop
with consumers closed.