Baxall ZMX/BD/10 Operating Instructions Manual Download

Page: 75 / 111

HBZMXSIB/10/16SD-PR-1

Page 74

buffer[1] = 0xAA;
buffer[2] = number of bytes starting from buffer[4];
buffer[3] = MACRO1 to MACRO16;
buffer[4] - buffer[x] The macro sequence keys

The numerical values of the keys are as follows:

Record

= 1

Play

= 2

Live

= 3

Alarm

= 4

Freeze

= 5

Zoom

= 6

Sequence

= 7

Multiscreen

= 8

’1’

= 9

’2’

= 10

’3’

= 11

’4’

= 12

’5’

= 13

’6’

= 14

’7’

= 15

’8’

= 16

’9’

= 17

’10’

= 18

’11’ = 19
’12’

= 20

’13’

= 21

   ’14’     = 22
   ’15’      = 23
   ’16’    = 24
   Setup = 25
   Select

= 26

RESERVED

= 27

RESERVED

= 28

   Macro Special 1  = 29 /* Activate Alarm Output 1*/
   Macro Special 2  = 30 /* Reset Alarm Output 1   */
   Macro Special 3  = 31 /* Pause Macro for 1 second
*/
   Macro Special 4  = 32 /* Pause Macro for 5 seconds
*/
   RESERVED

= 33

Mon_B Key

= 34

   Camera Power Key = 35
   Wash Key         = 36
   Auto Pan Key     = 37
   Lights Key

= 38

Wipe Key

= 39

Preset Key

= 40

Focus Far Key = 41
Focus Near Key

= 42

   Iris Close Key   = 43
   Iris Open Key    = 44
     Zoom In Key      = 45
   Zoom Out Key    = 46
   Telemetry_Key = 47
   Left Arrow Key   = 48
   Right Arrow Key  = 49
   Up Arrow Key     = 50
   Down Arrow Key

= 51

Up Left Key

= 52

   Down Left Key    = 53
   Up Right Key     = 54
   Down Right Key  = 55
   Macro Special 5  = 56 /* Activate Alarm Output 2 */
   Macro Special 6  = 57 /* Reset Alarm Output 2 */

The last byte of the macro buffer[x] = 58; Macro_End
The number of bytes in the macro may not exceed 32.

y) Enable activity detection

buffer[0] = 0xff;
buffer[1] = 0xAA;
buffer[2] = 16;

buffer[3] = ENACTIVITY;
buffer[4] - buffer[19] = BINARY list of 16 numbers -

digits (0 - disable, 1 -enable)

z) Request activity settings

buffer[0] = 0xff;
buffer[1] = 0xBB;
buffer[2] = 0;
buffer[3] = UP_ACT_SETTINGS;

aa) Request activity grid

buffer[0] = 0xff;
buffer[1] = 0xBB;
buffer[2] = 0;
buffer[3] = UP_ACT_GRID;

ab) Request alarm and videoloss status

buffer[0] = 0xff;
buffer[1] = 0xBB;
buffer[2] = 0;
buffer[3] = UP_ALM_AND_VDL;

ac) Download activity grid

buffer[0] = 0xff;
buffer[1] = 0xAA;
buffer[2] = 32;
buffer[3] = DN_ACT_GRID_1 to DN_ACT_GRID_16;
buffer[4] - buffer[35] BINARY digits corresponding to
zones.

Two bytes per row, 16 rows. (1 - active, 0 -

off)
NOTE: This message must be used with caution.
Delays of 100ms must be inserted between
consecutive camera grids.

ad) Downloading Timed Macro Information

buffer[0] = 0xff;
buffer[1] = 0xAA;
buffer[2] = 6;
buffer[3] = DN_TIMED_MACRO;
buffer[4] = Event number (1 - 20)
buffer[5] = Day (0 - 8) 0 -> Disabled
buffer[6] = Hour (1 - 12)
buffer[7] = Minute (0 - 59)
buffer[8] = AM/PM (0 - AM, 1 - PM)
buffer[9] = Macro Number (1-16)

ae) Setting the Record Lock

buffer[0] = 0xff;
buffer[1] = 0xAA;
buffer[2] = 1;
buffer[3] = REC_LOCK;
buffer[4] = 0 - OFF, 1 - ON

af) Setting the VCR Type

buffer[0] = 0xff;
buffer[1] = 0xAA;
buffer[2] = 1;
buffer[3] = VCR_TYPE;
buffer[4] = 0 - Type A,1 - Type B

ag) Setting the Vext Pulse active edge

buffer[0] = 0xff;
buffer[1] = 0xAA;
buffer[2] = 1;
buffer[3] = SWITCH_EDGE;