CONTENTS
Section
Page
1. SAFETY
3
2. LIST OF ACCESSORIES
4
3. APPLIANCE DATA
5
4. GENERAL INSTALLATION REQUIREMENTS
6
5. UNPACKING
13
6. INSTALLATION OF APPLIANCE
14
7. BURNER AND SUPPLY PIPE INSTALLATION
16
8. FITTING THE FIREFRONT
18
9. FITTING THE CERAMIC FUEL EFFECT
19
10. FULL OPERATING CHECKS
20
11. SERVICING & PARTS REPLACEMENT
22
11.1 Checking the aeration setting of the burner.
22
11.2 To remove the complete burner unit.
23
11.3 To remove the pilot unit.
23
11.4 To remove the gas valve.
23
11.5 To remove the piezo generator.
24
11.6 To grease the control tap.
24
11.7 To replace the burner.
24
11.8 To remove the main burner injector.
25
1. SAFETY
Installer
Before continuing any further with the installation of this appliance please read
the following guide to manual handling:
!
The lifting weight of this appliance (DGF burner) is 9 kg. One person should be
sufficient to lift the fire. If for any reason this weight is considered too heavy then
obtain assistance.
!
When lifting always keep your back straight. Bend your legs and not your back.
!
Avoid twisting at the waist. It is better to reposition your feet.
!
Avoid upper body/top heavy bending. Do not lean forward or sideways whilst
handling the fire.
!
Always grip with the palm of the hand. Do not use the tips of fingers for support.
!
Always keep the fire as close to the body as possible. This will minimise the
cantilever action.
!
Use gloves to provide additional grip.
!
Always use assistance if required.
Page 3
INSTALLER GUIDE
