background image

Safety First.

Baxi Fires Division heaters are CE Approved and designed to meet the appropriate

British Standards and Safety Marks.

Quality and Excellence.

All Baxi Fires Division heaters are manufactured to the highest standards of quality and

excellence and are manufactured to ISO 9001 

CUSTOMER CARE

Thank you for choosing Baxi Fires Division

All Baxi Fires Division heaters are designed to meet the most stringent quality,

performance and safety requirements to provide our customers with many years of

trouble free service.  This guide aims to improve your understanding and appreciation of

your new heater, by providing simple and informative instructions to enable you to

install it and to ensure that you benefit from the excellent performance and features it

has to offer.

If you require further assistance, the 

Baxi Fires Division Technical Helpline

will be

pleased to help.

Please telephone 

08706 061 065

(local rates apply in the United Kingdom).

In the Republic of Ireland telephone

0044 8706 061 065.

FOR OTHER USEFUL TELEPHONE NUMBERS SEE PAGE 13 OF THIS GUIDE

Page 3

INSTALLER AND OWNER GUIDE

© 

Baxi Heating U.K. Limited 2006.

Summary of Contents for 826 dream longlite















Reviews: