against the outer edge of the base (See figure 1- Item 1).
1.
Gently pinch the sides of the cable guide (See figure 1 - Item 4) and push the cable
guide into the required rectangular slot.
2.
Place the electrical cable into the guide and close the top of the cable guide.
If the electric cable is damaged, to avoid a hazard it must be
replaced by a Baxi Fires Division authorised service agent, or
similarly qualified person (See the last page of this guide for
useful telephone numbers).
All external wiring between the heater and the electrical
supply shall comply with current IEE regulations.
Removing the fascia
1.
Very strong magnets attach the fascia to the heater. Support
the rear of the heater and gently pull the fascia forward (See
figure 2).
2.
Keep the fascia in a safe place while installing the heater.
Heater fixing.
All fixings supplied with the heater have been identified in
figure 3.
Pa ge 7
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2007.
Figure 2. Removing the
fascia.
Figure 3. Loose parts identification (Items are not to scale. certain parts may not be
included or required)
