Install the 11 loose coals as follows.
The underside of each coal is marked
with a letter ‘A’ to ‘K’ and an arrow.
The coals should be positioned so that
the arrows always point towards the
back of the firebox. When located into
position the stem of each arrow should
be at 90° to the rear of the fireplace
opening (See figure 5).
4.
Hold coal ‘A’ upright with the arrow
pointing to the top. Locate coal ‘A’ as
shown in figure 5.
Locate coals ‘B’ to ‘E’
so that they are firmly
seated in the valleys in
the coal base and front
coal.
5.
Hold coal ‘B’ upright
with the arrow pointing
to the top. Locate coal
‘B’ as shown in figure 6.
6.
Hold coal ‘C’ upright
with the arrow pointing to
the top. Locate coal ‘C’ as
shown in figure 7.
Page 10
OWNER GUIDE
Figure 6. Second row “Coal B”
Figure 5. Front row “Coal A”
Figure 7. Second row “Coal C”
