background image

standards, it is a heating appliance and certain parts of its surface will become hot.).

Do 

wait three minutes before attempting to relight if the fire is switched off or the 

flames are extinguished for any reason. (Your fire is fitted with a safety device that will
automatically shut off the gas supply to the fire if, for any reason, the flames 
go out).

Do 

get advice about the suitability of any wall covering near your fire. Soft wall 

coverings (e.g. embossed vinyl, etc.) which have a raised pattern are easily affected 
by heat. They may, therefore, scorch or become discoloured when close to a heating 
appliance. Please bear this in mind whenever you are considering redecorating.

Do 

provide a minimum side clearance as detailed in figure 1. Please bear this in mind if

ever you are considering altering the room.

Don’t

hang clothing, towels or any other fabrics over the front of the fire.

Don’t

add any extra ceramic fuel effect pieces above the number stated in the installer

and owner guide supplied with the ceramic fuel effect. This should have been placed
inside or attached to this guide by the installer. This could cause incomplete combustion
and consequent safety hazard.

Don’t 

put paper or any other material on the fire.

Don’t

place any combustible material (rugs, carpet, plastic tiles, etc.) on the hearth.

Don’t 

attempt to clean or service the fire until it has been switched off and allowed to

cool completely.

GAS CONSUMPTION

Model 759

Has a maximum natural gas input of 5.1kW (Gross)
Has a minimum natural gas input of 3.0kW

Page 6

OWNER GUIDE

Summary of Contents for 759












Reviews: