6.6.2
Putting the inspection hatches back in place
1. Replace the lip gasket and retainer ring unit and place it in the
inspection opening, taking care to position the tab on the lip gasket
outside the domestic hot water tank.
2. Replace the sheet gasket.
Tab.4
A
Side inspection hatch with anode
3. Carefully refit the connections on the anode tester.
Important
Connect the beige wire to the anode.
Connect the black wire to the inspection hatch.
Fig.13
MW-5000827-1
6x
1
Fig.14
2
L000611-A
A
Fig.15
L
0
0
0
4
0
3
-A
3
6 Maintenance
7724479 - v03 - 07102019
AS 300–2E BC
23