The instructions and warnings affixed to the appliance
must never be removed or covered and must remain
legible during the entire lifespan of the appliance.
Immediately replace damaged or illegible instructions
and warning stickers.
Warning
Never turn the power off to the solar control
system even for extended absences. The control
system protects the installation from overheating
when it is operating in the summer.
Warning
Do not modify the control system parameters
unless fully conversant with them.
During extended absences, we recommend lowering
the set point temperature in the solar DHW tank to
45°C. When the user is present, the set point should be
set to 60°C.
1.3
Liabilities
1.3.1
Manufacturer's liability
Our products are manufactured in compliance with the
requirements of the various Directives applicable. They
are therefore delivered with the marking and any
documents necessary. In the interests of the quality of
our products, we strive constantly to improve them. We
therefore reserve the right to modify the specifications
given in this document.
Our liability as manufacturer may not be invoked in the
following cases:
Failure to abide by the instructions on installing and
maintaining the appliance.
Failure to abide by the instructions on using the
appliance.
Faulty or insufficient maintenance of the appliance.
1.3.2
Installer's liability
The installer is responsible for the installation and initial
commissioning of the appliance. The installer must
observe the following instructions:
Read and follow the instructions given in the manuals
provided with the appliance.
Install the appliance in compliance with prevailing
legislation and standards.
1 Safety
7724479 - v03 - 07102019
AS 300–2E BC
7
