11
555555
1
2
4
3
4
5
6
Connect the mains cold water to the unit’s inlet (3), and preheated water outlet
(4)
from the unit to the cold side of the shower mixer tap and/or domestic water
heater (depending on installation configuration). Use both of the provided Male
1/2’’ fittings and proceed to seal in accordance with best plumbing practices.
Connect the Assure Horizontal SHRU drain water outlet (2) to the drain pipe.
We recommend that the installer performs a leak test on the mains water circuit
and on the drain water circuit to ensure the integrity of the inlet and outlet
connections.
Assemble the
waste trap
and shower tray.
