13
Using suitable screws, fix the Assure Horizontal SHRU to the slab.
Make sure that the unit is installed horizontally. The internal bore of the
Assure
Horizontal SHRU
already has a slope of 2% to ensure the correct flow
of waste water from the shower.
Connect the mains cold water to the unit’s inlet (3), and preheated water
outlet (4) from the unit to the cold side of the shower mixer tap and/or
domestic water heater (depending on installation configuration). Use both of
the provided
m
ale 1/2’’ fittings and proceed to seal in accordance with best
plumbing practice.
Connect the Assure Horizontal SHRU drain water outlet (2) to the drain pipe.
555555
1
2
4
3
!
!
4
5
6
