7 Installation
7.1
Recommendations
The appliances must be installed by a certified professional in accordance
with prevailing statutory texts and codes of practice.
The installation must comply on all points with prevailing regulations and
directives, which govern work and interventions in individual homes,
blocks of flats and other buildings.
When installing the appliances, respect the protection ratings: IP24 for the
domestic hot water tank and IP24 for the outdoor unit.
When choosing the location of the domestic hot water tank, the outdoor
unit and the control panel, the installer must adhere to the following
recommendations:
1. Install a water drain in the boiler room.
2. Ensure there is a funnel-siphon for the safety unit.
3. Install isolation valves.
4. Fit a pressure reducer.
5. Fit a non-return valve to the domestic cold water circuit.
7.2
Install the appliances
7.2.1
Installing the domestic hot water tank to the wall without
a tripod
The domestic hot water tank wall mounting must take into consideration
the robustness of the wall. If the wall is thin, you must use the Tripod
option: Réf. 89788949.
The installer is responsible for the type of mounting used and the
mechanical integrity of the assembly including the bracket selection.
The screws, dowels and washers necessary to mount the brackets to the
wall are not provided.
The mounting brackets are supplied in the polystyrene base of the
domestic hot water tank.
1. Take note of the dimensions indicated in the diagram below to
position the domestic hot water tank on the wall.
2. Select the position of the upper and lower mounting brackets of the
domestic hot water tank, within the constraints of the wall being
mounted to (cable and pipe channels):
150L
Position of the upper
bracket
2 position options
Position of the lower
bracket
only 1 position permitted
3. Pre-fit to the wall with the screws protruding by at least 15 mm. The
M10 screws to use will depend on the type of wall. The screws must
be able to support the weight of the domestic hot water tank when it is
full of water.
Fig.27
150l
500
800
440
MW-2000632-1
250
200 mini
500
7 Installation
30
7689749 - v03 - 25112019
