6. Attach the domestic hot water tank by inserting the upper bracket onto
the screws.
The domestic hot water tank must rest on the tripod.
7. Fasten the screws.
7.2.3
Installing the outdoor unit
Installing the outdoor unit on the ground
When mounting to the ground, install a concrete base.
The data plate must be accessible at all times.
1. Dig a run-off channel with a pebble bed.
2. Install a concrete base frame with a minimum height of 80 mm
capable of bearing the weight of the outdoor unit.
3. Install the outdoor unit on the concrete base frame.
Fig.34
6
MW-2000627-1
7
42
Fig.35
MW-4000127-1
3
2
1
80
7 Installation
34
7689749 - v03 - 25112019
