background image

channel at the front of the radiant box.

Replace the dress guard. Locate the bottom of the dress guard in the two holes in the

bottom panel apron. Push the guard back so that the two spring projections at the top of
the guard engage in the slots under the front decorative canopy.

MAINTENANCE

Regular maintenance.

In order to achieve and maintain high levels of personal safety and performance
efficiency, it is essential that the opening at the back of the fire and the flue are kept
clear of any form of obstruction. It is possible that deposits of mortar or soot could fall
and accumulate causing the flue to be blocked or restricted and so preventing proper
clearance of dangerous exhaust fumes.
In the United Kingdom it is the law that a landlord must have any gas appliance, flue
and pipework which is situated in a tenant’s premises checked for safety at least every
twelve months by a competent person (In the U.K., a CORGI registered installer).
We recommend that all gas appliances and their flues, wherever situated, are checked
annually.

Servicing.

If you require your fire to be serviced, please contact British Gas or Scottish Gas

TELEPHONE 0845 950 0400 

and please quote the following details: 

Model name and number.
Appliance serial number (To be found on a label near the bottom left side of the 
fascia). 

If you wish to replace any radiants, spare parts are available nationwide via the 

interpart stockist network

’. For your local stockist consult Yellow pages under 

Central Heating.

Page 9

OWNER GUIDE

Summary of Contents for churchill II 347










Reviews: