14
6. Outdoor sensor
Connecting to an outdoor sensor
If an outdoor sensor weather compensator is connected in conjunction
with the uSense (OpenTherm installations only) you can
ONLY
adjust the
heating curve on the uSense App (you
CANNOT
adjust using the room
unit or boiler controls).
1. Open the Baxi uSense App
2. Click on the installer menu
3. Click on advance settings
4. Enter service code 0012
Remember to re-enter this code to disable
installer access when you finish adjusting the heating curve
5. You will see a message ‘Your access level has been updated’
6. Click OK
7. Click on heating curve
8. Change the curve to suit the requirements of the user in accordance
with the recommendations of the sensor manufacturer
9. Do not adjust any other settings in the Advanced Feature menu,
as they may affect the correct operation of the boiler
10. Either completely close the App or re-enter the code to cancel the
access level so that your customer can’t adjust important settings.