9. Confirm the selection.
10. Select your time zone.
11. Confirm your selection.
4.2.3
Main screen setting
You can add two information boxes on the main screen, one to the left and
one to the right of the rotary dial.
1. Enter the main menu.
2. Select Settings.
3. Select Main screen settings.
4. Use the rotary dial to select the left information box.
5. Select one of the options.
6. Confirm the selection.
7. Use the rotary dial to select the right information box.
8. Select one of the options.
9. Confirm the selection.
Important
You can short-press the home button to go back one step.
4.2.4
Show help messages
When you have just started to use the thermostat, the display shows a
help message after you change to a different mode. The message informs
you about the use of the quick access menu. The display will stop showing
these messages after some time.
If you wish to see the messages again:
1. Enter the main menu.
2. Select Settings.
3. Confirm the selection.
4. Select Show help messages.
5. Confirm the selection.
The display shows Show help messages enabled and the help
messages will appear again for some time.
4.2.5
Presence sensor
The thermostat has a sensor for presence detection. When you pass by or
approach the thermostat, the main screen of the display will light up for 5
seconds. This setting is on by default.
You can switch off the presence detection.
1. Enter the main menu.
2. Select Settings.
3. Select Presence sensor detection.
4. Select Off.
5. Confirm the selection.
Important
With the presence sensor switched off you need to press a
button or turn the rotary dial to activate the display. The main
screen of the display will light up for 30 seconds.
Set Presence sensor detection to On to activate the presence
sensor again.
4.2.6
Display current or target temperature
The thermostat displays the current temperature in a large font by default.
The target temperature is in a small font near the temperature scale.
Fig.32
AD-3001006-01
....... .......
....... ....... ....... ....... ....... ....... ....... ....... ....... .......
..
.
|
..
.
}
<1
Fig.33
AD-3001007-01
....... .......
....... ....... ....... ....... ....... ....... ....... ....... ....... .......
<1
4 Customisation
7718216 - v.02 - 26042019
23
