17. Use the rotary dial to change the steepness.
18. Confirm the change.
19. Use the rotary dial to select Save at the bottom-right corner of the
display.
20. Confirm to save the changes in the heating curve.
4.5.2
Setting the control strategy
The control strategy determines the way in which the thermostat controls
the heating of the room or a zone.
1. Enter the main menu.
2. Select Installer.
3. Confirm the selection.
4. Select Yes to continue.
5. Confirm the selection.
6. Select Control Strategy.
Important
The display shows Control Strategy only if your installation is fit for
this option.
7. Confirm the selection.
8. Select the Control Strategy that you want:
Room: the thermostat controls the heating on the basis of the room
thermostat.
Outside: the thermostat controls the heating on the basis of the
outside temperature sensor.
Room & Outside: : the thermostat controls the heating on the basis
of the outside temperature sensor and the room thermostat.
Automatic: the thermostat chooses one of the control strategies on
the basis of the connected sensors.
9. Confirm the selection.
4.5.3
Setting the heating rate
The heating rate determines how slow or fast the installation will heat up
the room or zone at the start time of the scheduled heating period.
1. Enter the main menu.
2. Select Installer.
3. Confirm the selection.
4. Select Yes to continue.
5. Confirm the selection.
Fig.44
AD-3001254-01
....
..... :
....
..... :
....... : .. ..
....... : .. ..
.......
<1
Fig.45
AD-3001006-01
....... .......
....... ....... ....... ....... ....... ....... ....... ....... ....... .......
..
.
|
..
.
}
<1
Fig.46
AD-3001255-01
....... .......
....... ....... ....... ....... ....... ....... ....... ....... ....... .......
....... ....... ....... ....... ....... ....... .......
..
.
...
.
..
<1
Fig.47
AD-3001006-01
....... .......
....... ....... ....... ....... ....... ....... ....... ....... ....... .......
..
.
|
..
.
}
<1
4 Customisation
7718216 - v.02 - 26042019
31