background image

BAXLEY 

Trailer Company 

 

3300 E. Cottonwood Rd. 

Dothan, Al. 36301 

(334) 794-2393 

Fax (334) 671-1351 

www.baxleycompanies.com 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

ST-001 Sport Bike Trailer

 

Owner’s 

Manual 

Periodic Inspection and Maintenance

 

1.  

Check all nuts and bolts to be sure they are secure and in 
place before each use. 

2.  

Check that the Sport Chock operates properly and 
occasionally lubricate the pivoting areas with light oil. 

3.  

Grease the axle and suspension assembly (two grease 
fittings on rear swingarm) annually or every 5000 miles.

4.  

Make sure wheel bearings are properly torqued and in 
good working order. Pack with grease every 2 years or 
10,000 miles. Wheel bearings should be checked after 
the first 500 miles for proper adjustment. Wheel should 
turn freely but you should not feel any looseness on the 
spindle. 

5.  

Check that all lights are in good condition and operate 
properly. 

6.  

Check main latch bar for any wear and be sure that the 
rubber bumper (on main tongue under the latch area) is 
attached and in good condition. 

7.  

Inspect hitch to be sure latch mechanism fits tightly over 
ball and does not have excessive wear. 

8.  

Check tires for dryrot and excessive or uneven wear 
before each use. 

 
 

grease fitting

8

Summary of Contents for ST-001









Reviews: