107
Static IP Address Configuration
Configuring PathWay Access for a static IP address requires configuring both PathWay Access and FastLink II
for the same static IP address.
To configure PathWay Access for a static IP address:
1
Run the PathWay Access setup utility PWSETUP.EXE in DOS or in a DOS box from Windows.
2
Choose Configuration from the utility menu bar, and then select Modify Site Parameters.
3
In the dialog box entitled Configuration Setup for Site Parameters, enter your static IP address in
the IP Address field.
4
Enter your gateway IP address n the Default Gateway Address field.
5
Set the Number of subnet mask bits field to the number required for your IP subnet mask. (For
example, 27 bits would support the mask 225.225.225.224.)
6
Enter your static IP address in the IP Address field.
7
Type
[Ctrl]-[Enter]
followed by
Y
to overwrite the previous settings.
To configure FastLink II for a static IP address:
1
Run FastLink II, and select the Connections button at the left of the screen. Highlight the Connect
drop-down box, and select the connection whose settings you want to set for your IP connection.
2
Click on the
[IP Protocol Settings]
button, and check the Static IP address button.
3
Highlight the Address field and enter your static IP address.
