am.book : ch20 13 Tue May 6 13:24:47 1997
20-13
Chapter 20 Displaying Status Information
Annex Manager User Guide
Part 4 Control and Status Commands
•
Type
categorizes the interface according to the physical/link
protocols immediately below the network layer.
•
MTU
(Maximum Transmission Unit) shows the size of the
largest packet (in octets) that the interface can send or receive.
•
Speed
displays an estimate of the current bandwidth of the
interface in bits per second.
•
Oper Status
shows the current operational state of the interface.
This field can display
Up
or
Down.
•
Last Change
indicates the time at which the interface entered its
current operational state.
Reading the Statistics Box
The
Statistics
box displays statistics related to traffic on each interface.
This box uses a separate line for information about incoming and outgoing
traffic. It includes the following categories:
•
Intf Name
provides a text description of the interface.
•
Octets
shows the total number of octets received or transmitted
on the interface, including framing characters.
•
Ucast Pkts
lists the number of subnetwork-unicast packets
received from or delivered to a higher-layer protocol.
•
NUcast Pkts
lists the number of subnetwork-broadcast or
subnetwork-multicast packets received from or sent to a higher-
layer protocol.
Summary of Contents for Manager
Page 10: ...am book amTOC doc x Tue May 6 13 24 47 1997 Annex Manager User Guide Contents x ...
Page 14: ...am book amLOF doc xx Tue May 6 13 24 47 1997 Annex Manager User Guide Figures xx ...
Page 16: ...am book amLOT doc xxii Tue May 6 13 24 47 1997 Annex Manager User Guide Tables xxii ...
Page 22: ...am book pref xxviii Tue May 6 13 24 47 1997 Annex Manager User Guide Preface xxviii ...