19
HOW TO: Update Software
Needed for Software Updated:
1 USB stick with motherboard software
1 USB stick with minigen software
1- Minigen Software Load:
Game must be powered on for this procedure.
Open the front door of the cabinet and locate
the minigen board.
Insert the USB stick marked G1 (for minigen)
into the USB port.
Push the boot button located next to the dip
switches.
The software will load quickly; the USB stick will
flash and the game will reset, resuming normal
function within a few seconds.
2- Motherboard Software Installation:
Power down your game and uplug it from the
main power source before proceeding.
Locate the USB port on the motherboard and
remove the old software stick.
Replace the stick with the new USB labeled
PC.
Plug in the game and power it back on.
