6
GAME SPECIFICATIONS
SAFETY PRECAUTIONS
WEIGHT
NET WEIGHT
400 LBS.
SHIP WEIGHT
450 LBS.
DIMENSIONS
WIDTH
44.5”
DEPTH
44”
HEIGHT
97”
(88.75” without ‘hasp’)
OPERATING TEMPERATURE
FAHRENHEIT
80-100
CELSIUS
26.7-37.8
POWER REQUIREMENTS
INPUT VOLTAGE
RANGE
100 to 120
VAC
/ 220 to 240
VAC
INPUT FREQUENCY
RANGE
50 HZ
/
60 HZ
MAX OPERATING
CURRENT
1.4 AMPS @ 115 VAC
.8 AMPS @ 230 VAC
DANGER
DO NOT perform repairs or maintenance on this game with the power ON.
Unplug the unit from the wall outlet or shut off the power strip located inside the cabinet.
!
!
NOTICE
Modifications to the mechanical, electrical and structural components of this game
may void its compliance certifications.
!
!
WARNING
Use of flammable subtances can cause sever burns or serious injury.
Always use NON-FLAMMABLE solvents for cleaning. DO NOT use gasoline kerosene or thinners.
!
!
CAUTION
Lifting heavy objects can cause back, neck or other injuries. Be sure adequate lifting and moving
devices are available when unloading, unpacking and moving this game.
!
!
ATTENTION
Be sure the electrical power matches the game requirements. See the serial number located on the
back of the game cabinet. Always plug into a grounded circuit. If the supply cord is damaged, it must
be replaced by an approved cord or assembly provided by the manufacturer.
A shielded power cable must be used for the game to retain EU/EMC compliance.
!
!
IN CASE OF EMERGENCY
UNPLUG THE POWER CORD.
The power cord must be accessible at all times in case of an emergency.
!
!
This appliance is suitable for INDOOR, DRY locations only.
Summary of Contents for Pop the Lock
Page 12: ...12 HEIGHT MODIFICATION OPTIONS...
Page 23: ...23 MAINBOARD PINOUT 15...
Page 39: ...39 DECALS DIAGRAM 20...
