11
Digital Video Baby Monitor
EN
■
Battery operation minimises electro-smog which arises due to the effect of alternating electric and
magnetic fields.
■
To recharge a unit, connect it to an external power source. If you do not do so, it will turn off
automatically after a certain time. The LED power indicator B
4
and/or C
3
will turn off.
Note:
You can see the battery power level of the parent unit A
3
in the top right corner of the screen C
1
.
■
If you are planning on not using the baby monitor for an extended period of time, we recommend
that you allow the batteries to discharge to half their capacity.
Using the baby monitor and its functions
1. Baby unit
■
Turning on and off
–
To turn on the baby unit A
1
, press and hold button B
6
for approximately 3 seconds. When it
is turned on, the LED indicator B
4
will be lit green. If a battery is being charged, the LED
indicator B
4
will be lit red.
–
To turn off the baby unit A
1
, press button B
6
and hold it down for approximately 3 seconds.
The turned off state of the baby unit A
1
is signalled by the LED indicator B
4
turning off. If
a battery is being charged, the LED indicator B
4
will be constantly lit red.
–
Whenever you finish using it, always turn off the baby unit A
1
and disconnect the power adapter
A
5
or the charger A
6
from the external power source. When a battery is being charged,
disconnect the baby unit A
1
from the external power source only after the charging process
has finished.
■
LED indicator showing that the baby unit is on and the battery is being charged.
–
When the LED indicator B
4
is lit green, it signalises that the baby unit A
1
is turned on.
–
When the battery is being charged, the LED indicator B
4
will be lit red irregardless of whether
the baby unit A
1
is on or off.
–
When the baby unit A
1
is turned off and the charging process is complete, the LED indicator
B
4
will be off.
■
Night-vision mode
–
The baby unit A
1
is equipped with eight infrared LED diodes B
2
, thanks to which it is possible
to see a picture even in complete darkness. The infrared light of the diodes B
2
is invisible to
the human eye.
–
When the light sensor B
8
detects a low level of ambient light, the LED diodes B
2
will activate
themselves automatically. In this mode, the screen C
1
on the parent unit A
3
will show a black
and white picture.
2. Parent unit
■
Turning on and off
–
To turn on the parent unit A
3
, press and hold button C
5
for approximately 3 seconds. When
it is turned on, the LED indicator C
3
will be lit green. If a battery is being charged, the LED
indicator C
3
will be lit red.
