3
Digital Video Baby Monitor
EN
Safety instructions and important notes
■
Before first use, thoroughly read the user's manual. Keep this user's manual for future use.
Attention:
This baby monitor meets all relevant standards and its use is safe when all the instructions contained
in this manual are followed.
■
The baby monitor serves to monitor your child when you are driving a car and need to focus on driving
or when you are not in the same room and cannot monitor it directly. Nevertheless, it is important to
keep in mind that your child's safety comes first and therefore the baby monitor cannot serve as
a substitute for supervision by a responsible adult.
When it is used in a car, it is necessary to
adhere to the fundamental rule, that the driver must focus on driving the vehicle to prevent
endangering other traffic participants.
■
This baby monitor is intended for home (private) use only. It is not intended for commercial purposes.
■
After unpacking the baby monitor and its accessories from the packaging material, place the plastic
bags in a safe location out of the reach of children. In the presence of children, plastic bags may
present a suffocation hazard.
■
Only use the baby monitor with the original adapter and 12V car charger that came with it. The power
adapter and the charger are only intended for powering this baby monitor. Do not use it to power
other appliances.
■
Never use the baby monitor with accessories that are not approved by the manufacturer.
■
Before connecting the power adapter to a power socket, make sure the voltage stated on its rating
label corresponds to the voltage in the power socket. Position the power cord of the power adapter
so that it will not be tripped over.
Attention:
Before connecting this baby monitor to a 12V car socket, always check that the socket is compatible
with the electrical specifications of this product.
■
Before you connect the charger to the cigarette lighter socket, check that it is clean (free of cigarette
ash). In cars where it is is possible to power the appliance from a 12V power socket without the car
engine running, it is important to check the state of the battery to avoid it from going completely flat.
For this reason, we recommend to always have the motor running when connecting the baby monitor
to the 12V car socket.
■
If you have just used the 12V socket as a cigarette lighter, allow it to cool down for approximately
5 minutes and only then use it to power the baby monitor.
■
Do not connect the baby monitor to a 24V car socket, which is often found in trucks. Otherwise, the
baby monitor or the electrical wiring of the car could be damaged.
■
The baby monitor may only be operated by adults.
■
Children must not play with the baby monitor. Keep the baby monitor, power adapter and car charger
out of the reach of children.
