Baby bottle and food warmer
EN
9
■
The here mentioned warming times are based on the use of polypropylene bottles (PP) . Please note that time
intervals for warming up glass bottles may differ .
■
Due to the possible consistencies of baby food, the values provided above are only indicative in nature .
■
In the event that you find that the baby food is not warmed up sufficiently, restart the warming cycle and next
time you may add a little more water into the heating tank A
3
.
■
If on the other hand you find that at the end of the warming cycle that the baby food is too hot, allow the meal
to cool down to the required temperature, check it by tapping it against your wrist and next time you can pour
a little less water into the heating tank A
3
.
!
Attention:
If you leave the bottle in the bottle warmer longer than specified in the table, the milk may overheat . If you
overheat breast milk, valuable nutrients and vitamins may be lost .
■
Never allow water to rise above the neck of the bottle or to spill over the edge of the bottle warmer .
■
Check that the switch B
2
is in the "OFF" position (turned off) and plug the bottle warmer into a power socket
using the power cord in socket A
7
.
■
Select the warming method by setting switch B
2
to home warming (picture of a house) .
■
Press the ON switch A
4
.
■
The indicator light A
5
signalises that the bottle warmer is running .
■
The ON switch A
4
cannot be used for turning off the appliance . The bottle warmer will automatically turn off
at the end of the warming cycle .
!
Attention:
The steam that is released during the warming process is hot . Keep your hands away during the warming
process .
■
If you wish to turn the bottle warmer off at any time, set the switch B
2
to the middle OFF position (turned off)
and unplug the power cord A
7
from the power socket .
■
At the end of the warming cycle, immediately take the bottle out of the bottle warmer and set the switch B
2
at the rear of the bottle warmer to the OFF position (turned off) . Then, please unplug the appliance from the
power socket .
■
Shake the baby food or milk after taking it out of the bottle warmer . Check the temperature of the food or milk
by dripping a little on your wrist . Carefully dry the bottle before serving the food to a child .
