background image

Options

34

Need Help ?  Bayer Diabetes Care: 1-800-348-8100

(available 24 hours a day, 7 days a week)

Options

35

www.bayerdiabetes.com/us

V

iewing Stor

ed Results

Using the Memory:

With the meter off, press the 

M

button on the meter to view stored 
test results. 

The 

14 day average

 will appear 

on the display with the average for 
test results taken over the last 14 
days. If you have set an alarm that 
has not sounded yet, you will also 
see a 

 symbol.

Number of results:

 The number 

of results included in the average 
is shown at the top of the display. 
Your control results are not included 
in this 14 day average. 

Press 

 to view the 7 day total. 

7 day total:

 Your meter will display 

the total number of results taken 
during the last seven days.

High and low results:

 At the top of 

the display you will see the number 
of high results (above 180 mg/dL) 
and low results (below 72 mg/dL) 
during that seven day period.

V

iewing Stor

ed Results

Press 

 to review previous 

results.

Previous results:

 Results will be 

shown starting with the most 
recent. Each result will show the 
date and time the test was taken, 
as well as any symbols you chose 
to mark the test result.

You can press 

 or 

 to scroll 

forward or backward through 
the results. You can press and 
release the button to view stored 
results one at a time or you can 
hold it to move through results 
continuously.

When 

 appears on the 

display, you have viewed all of the 
results in the memory.

The meter will hold 480 results in 
the memory. When the maximum 
is reached, the oldest test result 
will be removed as a new test 
is completed and saved to the 
memory.

Press 

M

 to turn the meter off, or 

it will automatically turn off after 
three minutes.

84378888_CntrLINK_UG_EN_FpBp_v3.indd   34-35

84378888_CntrLINK_UG_EN_FpBp_v3.indd   34-35

3/30/12   11:58 AM

3/30/12   11:58 AM

Summary of Contents for Contour link





























Reviews: