T
esting
6
C
ONTOUR
®
XT meter C
ONTOUR
®
N
EXT
test strips
T
esting
7
Need Help? 0845 600 6030 (UK) / 1 890 920 111 (Ireland)
www.bayerdiabetes.co.uk
Information F
or Safety
Getting Ready to T
est
Information For Safety
•
Have all the materials you will need ready before
you begin testing.
This includes your C
ONTOUR
®
XT
meter, the C
ONTOUR
®
N
EXT
test strips, the M
ICROLET
®
2
lancing device and M
ICROLET
®
lancets. You will also
need C
ONTOUR
N
EXT
control solution to run a quality
control check. C
ONTOUR
N
EXT
control solutions are
available separately. Call Bayer Diabetes Support at
0845 600 6030 (UK) / 1 890 920 111 (Ireland)
•
Examine product for missing, damaged, or broken parts.
If the test strip bottle is open inside a new box of strips,
do not use those strips. Contact Bayer Diabetes Support
at 0845 600 6030 (UK) / 1 890 920 111 (Ireland) for
replacement parts.
•
The M
ICROLET
2 lancing device is intended
for self testing by a single patient. It must not be
used on more than one person due to the risk of
infection.
•
Use a new M
ICROLET
lancet each time you test
because it is no longer sterile after use.
•
Do not perform a blood glucose test when the
C
ONTOUR
XT meter is connected to an external device,
e.g., computer.
•
Use only approved equipment from the manufacturer or
certified body such as UL or TUV.
Preparing the Test Strip
1.
Wash and dry your hands well before testing.
2.
Remove a C
ONTOUR
®
N
EXT
test strip from the bottle.
Use only Bayer’s
C
ONTOUR
N
EXT
test strips.
3.
Hold the test strip with the
grey end facing up.
4.
Insert the grey end into the
test strip port on the meter.
The following steps are shown in the proper order for
performing a blood glucose test, pages 7 – 12.
Preparing the Lancing Device
2.
Loosen the round
protective cap on a lancet
by rotating it ¼ turn, but
do not remove it. Always
use M
ICROLET
®
lancets for
best operation.
1.
Remove the endcap from
the M
ICROLET
®
2 lancing
device with your thumb on
the grip indent as shown.
The meter will turn on. An image of a test strip with a flashing
blood drop
will appear letting you know the meter is
ready to test.
81534497_CntrXT_UG_ENuk_FpBp_v0.indd 6-7
81534497_CntrXT_UG_ENuk_FpBp_v0.indd 6-7
1/25/13 8:13 AM
1/25/13 8:13 AM