Chapter 2: Features & Systems
2858 Classic Cruiser • Owner’s Manual Supplement
18
•
Standard 110 volt AC systems feature one, 110V/30 amp, shore power receptacle.
•
If your boat is equipped with an optional air conditioning system, a second (dual) 30 amp inlet has been installed.
Dual shore power inlets are labeled line 1 and line 2, which corresponds to the line 1 and line 2 master breakers on
the AC panel.
•
The optional dual shore power system is designed so that each line is independent of the other.
Connecting To Shore Power
1. Turn Off all breakers
and switches on the
AC master panel.
2. Attach the shore
power cord to the boat
inlet first then to the
dockside outlet.
3. Monitor the AC
panel’s polarity indi-
cator lights, located
below the line master
breaker(s), as follows:
•
A green light illuminat-
ing after the power
cord is plugged into the
dockside outlet indi-
cates acceptable
electrical power. You
may turn On the master
breaker switch.
•
A red light, however,
indicates reversed
polarity, which could
cause electrical system
damage and possibly
electrical shock inju-
ries. In this case, do not
turn On the master
breaker switch (see
previous warning).
4. Switch the "Line 1
Dockside Master" On.
5. Switch the "Line 2
Dockside Master"
On (dual dockside
option only).
6. Turn On the individual component breakers as required.
SINGLE SHORE POWER AC PANEL
SHORE POWER
INLETS
SINGLE INLET AFT
SHORE POWER INLETS
TYPICAL
SHORE POWER
RECEPTACLE
STARBOARD SIDE
OF COCKPIT
STANDARD
DUAL INLETS
WITH AIR/COND
(OPTION)
Summary of Contents for 2858 Classic Cruiser
