7
RFID read mode interface is shown in [Graph 2].When in this mode, user can
single-click “Read” button or press the physical ‘scan’ button on the right side of
the BN-HH-G02 to start the single RFID read operation. The single RFID read
operation ends with either a successful read of a single RFID or a time-out event.
User enters multiple RFID read mode by single-clicking
“RFID_Multi_Read(EPC)” or “RFID_Multi_Read(TID)”button in [Graph 1].
The multiple RFID read mode interface is shown in [Graph 3]. When in this
mode, user can single-click the “Read” button or press the physical “scan” button
to start the multiple RFID read operation. User stops the multiple RFID read
operation by single-clicking the “Stop” button.
Please make sure to stop the
“RFID_Multi_Read” function when not using this function; otherwise, the
battery power will drain fast!
User enters bar code scanning mode by single-clicking the “BarCode” button in
[Graph 1]. The barcode scanning mode interface is shown in [Graph 4]. User
can single-click the “Read” button or press the physical “scan” button on the left
side of the BN-HH-G02 to start the barcode scanning operation. The barcode
scanning operation ends with a successful read of a barcode or a time-out event.
5. RFID Notice
When you use the RFID function, do not cover the RFID antenna area on the rear
of the device. Suggest to holdboth sides of the device, and to read the tag as
shown below.
