13
Maintenance
Dosing pump hose replacement
MAINTENANCE PLAN
Weekly check
–
Make sure you keep your filter system in perfect condi
tion.
–
After adding fresh water, check the salt content and add
salt if necessary.
–
Check the values for pH and chlorine, preferably with a
BAYROL Technik Electronic Pool Tester.
–
Carry out a visual inspection of the system for leaks in all
components, lines and hose
Yearly maintenance
–
Replace the pH sensor and calibrate it.
–
Replace the Redoxsensor and set the correct setpoint
mV. Make sure that the chlorine level in the pool water is
at the desired level.
–
Replace the dosing pump hoses.
–
Check the pH injection valve and replace, if necessary.
Please note
Only use original BAYROL Technik components. The use
of thirdparty components can lead to malfunction during
operation. BAYROL Deutschland GmbH disclaims all
liability and warranty for this.
38
