7
Assembly Instructions
8.
Use a Phillips screwdriver to remove the additional metal brackets which hold the wood slides into place.
So that you can pull the table top wide open and take out the leaf inner box. These are used for shipping
purposes only. After removing them, please discard.
9.
Ask for assistance to lift the unit upright and position it at the desired location. If necessary, adjust the pre-
attached floor levelers at the bottom of legs to level the unit.
10.
Fasten the legs (C) to the mounting boards under the table top (A) by fitting the flat washer (FF), lock
washer (EE) and hex nut (DD) onto each threaded rod. Securely tighten the nuts with the provided open
wrench.
