5
E
Heater Control.
Press the heater button to turn the heater on or off.
When the heating function turns on, press and hold heater button for 5 seconds to enter temperature adjustment mode. In
adjustment mode, the Display Unit flashes. The temperature setting range is between 62°F - 82°F - ON (17°C - 27°C - ON).
Timer Function.
You activate the timer by pressing the button multiple times to get the amount of time you want the fireplace/heater to
run. The timer button operates both the flames and the heater function. If the heater is operating when the timer is set,
then the heater is on the timer. If the flames are operating, then the timer will control the flames. If both the heater and
flames are operating with the timer is set, then the timer controls both the flames and the heater. Pressing the button in
sequence will set the timer for a set interval. This interval period is shown in the display segment. The set intervals are as
follows:
BUTTON PRESS
TIMER INTERVAL
DISPLAY VALUE
1
st
press
30 Minute Interval
30
2
nd
press
1 hour
1h
3
rd
press
2 hour
2h
4
th
press
3 hour
3h
5
th
press
4 hour
4h
6
th
press
5 hour
5h
7
th
press
6 hour
6h
8
th
press
OFF
NONE
The timer interval is set from the time the interval is selected. There is no clock function for turning the heater or flames
on or off at a specific time.
Brightness Adjustment
There are six settings for the brightness. Pressing the brightness button in sequence will set the brightness for different
level. It will deactivate the flame color and speed adjustment function if you set the brightness to “H0”.
Flame Color Adjustment
There are six settings for the flame color. Pressing the flames button in sequence will set the flames for different color.
To turn on Bluetooth
TM
link, gently press and hold the flame button for 5 seconds until the front LED lights show "bt".
The display unit flashes 30 seconds, indicating it is in searching and pairing mode. The LED lights stop flashing and
indicating once your Whalen Fireplace Bluetooth
TM
remote app paired with the fireplace.
NOTE:
When the unit is turned off that LOGS completely die out for 3 seconds.
Flame Speed Adjustment
There are six settings for the flame speed. From 1 to 5 means low speed to high speed, and 6 is auto cycle for speed.
NOTE: Press and hold this button for five seconds until “beep” sound to enter the child lock model (Child lock model
means heating function is not work. If want to cancel it, please keep pressing and holding this button for five seconds)
OPERATION (CONTINUED)
