48
HOW TO
REPLACE LED LIGHTS IN PLAYFIELD
The LED lights are sandwiched between plywood and plastic.
If needed to be replaced, the assembly can be removed from the game and brought to a bench to replace a
LED light strip.
To remove and replace:
1.) Remove Arrow Plexi: Remove the 4 of #2 square bit
screws from top arrow plexi.
From back of cabinet - unplug the cable CE6556 and
remove plexi from front of the cabinet
2.) Remove Marquee: From back of the cabinet:
unplug the CE6533 and CE6531 cables. From the
front of the cabinet: Remove the 4 bolts from edge
of marquee.
Remove the marquee from the cabinet.
3.) Remove all of the #2 square bit screws from front
plexi and remove plexi from game.
4.) The playfield wood is separated into 3 sections:
Right, Middle, and Left
Only remove the section that has the faulty LED strip.
From back of cabinet - unplug the cables in the
Section you are removing.
Only remove the #2 square bit
screws in that section that are not
circled. These will be removed
later.
Important: Do not remove the
circled screws at this time!
5.) The wood section can now be removed from the cabinet and brought to a flat bench to remove and
replace faulty LED strip.
6.) Remove the circled screws and lift plywood from assembly. LED strips can now be replaced.
7.) Re-installation is the reverse of removal.
HOW TO
REPLACE LED LIGHTS IN PLAYFIELD
Summary of Contents for SQUIGGLE
Page 1: ...1 ...
