SLUS530D − SEPTEMBER 2002 − REVISED SEPTEMBER 2003
www.ti.com
2
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during
storage or handling to prevent electrostatic damage to the MOS gates.
ORDERING INFORMATION
TA
CHARGE
REGULATION
VOLTAGE (V)(1)
OPTIONAL
FUNCTIONS(1)
PART NUMBER(2)
MARKINGS
4.2
PG and TS
bq24010DRC
AZN
−40
°
C to 125
°
C
4.2
PG and CE
bq24012DRC
AZP
−40
°
C to 125
°
C
4.2
CE and TTE
bq24013DRC
AZQ
4.2
CE and TS
bq24014DRC
AZR
(1) Contact Texas Instruments for other options.
(2) The DRC package is available only taped and reeled. Add R suffix to device type (e.g. bq24210DRCR) to order. Quantities are 3,000 devices per
reel.
DISSIPATION RATINGS
PACKAGE
θ
JA
TA < 40
°
C
POWER RATING
DERATING FACTOR
ABOVE TA = 40
°
C
DRC(1)
47
°
C/W
1.5 W
0.021 W/
°
C
(1) This data is based on using the JEDEC High-K board and the exposed die pad is connected to a copper pad on the board. This is connected to the
ground plane by a 2x3 via matrix.
ABSOLUTE MAXIMUM RATINGS
(1)
UNIT
Supply voltage range, (VCC all with respect to VSS)
−0.3 to 18
V
Input voltage range(2)
IN, STAT1, STAT2, TS, PG, CE, TTE
−0.3 to VCC
V
Input voltage range(2)
BAT, OUT, ISET
−0.3 to 7
VDC
Voltage difference between VCC and IN inputs
VCC − VIN
±
0.5
V
Output sink/source current
STAT1, STAT2, PG
15
mA
Output current
IN, OUT
1.5
A
Operating free−air temperature range, TA
−40 to 125
Junction temperature range, TJ
−40 to 125
°
C
Storage temperature, Tstg
−65 to 150
°
C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
300
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are DC and with respect to VSS.
RECOMMENDED OPERATING CONDITIONS
(1)
MIN
NOM
MAX
UNIT
Supply voltage(1), VCC
3.0
16.5
V
Input voltage(1), VIN
3.0
16.5
V
Operating junction temperature range, TJ
−40
125
°
C
(1) Pins VCC and IN must be tied together.
Summary of Contents for PV420S
