SLUS530D − SEPTEMBER 2002 − REVISED SEPTEMBER 2003
www.ti.com
17
APPLICATION INFORMATION
PCB LAYOUT CONSIDERATIONS
It is important to pay special attention to the PCB layout. The following provides some guidelines:
To obtain optimal performance, the decoupling capacitor from V
CC
to V
SS
and the output filter capacitors from
BAT to ISET should be placed as close as possible to the bqTINY, with short trace runs to both signal and V
SS
pins.
All low-current V
SS
connections should be kept separate from the high-current charge or discharge paths from
the battery. Use a single-point ground technique incorporating both the small signal ground path and the power
ground path.
The BAT pin is the voltage feedback to the device and should be connected with its trace as close to the battery
pack as possible.
The high current charge paths into IN and from the OUT pins must be sized appropriately for the maximum charge
current in order to avoid voltage drops in these traces.
The bqTINY is packaged in a thermally enhanced MLP package. The package includes a thermal pad to provide
an effective thermal contact between the device and the printed circuit board (PCB). Full PCB design guidelines
for this package are provided in the application note entitled: QFN/SON PCB Attachment Application Note (TI
Literature No. SLUA271).
There is an internal electrical connection between the exposed thermal pad and V
SS
pin of the device. The
exposed thermal pad must be connected to the same potential as the V
SS
pin on the printed circuit board. Do
not use the thermal pad as the primary ground input for the device. V
SS
pin must be connected to ground at all
times.
Summary of Contents for PV420S
