1. Use cuspidal forceps to take out the LOCK
button.
2. Insert the forceps into the lock hole and then
prize up one corner of the glass.
3. Use a slice with thickness about 0.1mm to in
sert into the gap of the glass prized up and then
peel off glue of the glass slowly to tale out the
glass. Pay attention not to damage touch button
FPC.
4. After peeling off glue of the glass, use nails
to take out the glass.
Chapter Four
Assembly and Disassembly Process
In order to get to know the structure of V3more easily and directly, now we use pictures to
present each key point of disassembly and assembly process before all users to prevent users from
operating blindly and to damage elements, so we hope you can operate according to the
instructions strictly.
Note: all operations must be with strict anti-static measures. Operators must wear anti-static
gloves or wrist ring; electric screwdriver must be grounded effectively and articles, such as nippers
must be removed static before using!
4.1 Disassembly process of the player
- 58 -
