7
• Avoid direct sunlight, high humidity or areas of extreme temperatures. The unit is designed to
function properly within a temperature range of 32° - 104° F (0° - 40° C).
• Avoid areas where dust collects, where water or oil may come in contact with the unit, or
where sulfuric gases are produced.
• Avoid areas where vibrations or shocks are expected to occur.
• Install the unit at least
fi
ve feet away from radios, televisions and broadcast antennas.
• Install a ground wire using a good earth ground and connect it to the IPS ground lug.
Wall Mounting Instructions
The unit is designed to be wall-mounted by hanging it on four screws.
1. Position the paper template on the wall, exactly where you want to mount the unit.
2. Mark the four screw “holes” on the wall.
3. Install the screws at the spots marked. Leave 5/16” (8mm) of each screw protruding.
4. On the back of the unit are four keyhole-shaped openings. Hang the unit by
fi
tting the openings
over the screws. Gently slide the unit down.
Installing Your Phone System Unit
Chapter
2
- Installation Guide
