48
Programming Outside Lines
Each outside line must be programmed separately. The programming procedure is quite simple if
you take it step-by-step. First, decide on the codes you want to enter for each line. Write the code
for each of your choices in the table provided on the next page. Then program one line at a time.
The default settings are marked with an asterisk (*).
739
1.
In the programming mode, lift the handset and dial “739”.
2.
Enter the line number (1 to 4).
(For IPS 308 model, 1 to 3.)
3.
Enter the code for enabling the CO line and for Auto-Attendant
(or DISA) operation.
* 0 No
DISA
1 DISA in day mode only
2 DISA in night mode only
3 DISA
always
4 Disable this CO line
4.
Enter the code for the desired dialing mode and switch-hook (
fl
ashing)
capability.
0 Pulse dialing, switch-hook not allowed.
2 Tone (DTMF) dialing, switch-hook not allowed.
4 Pulse dialing, switch-hook allowed.
* 6 Tone (DTMF) dialing, switch-hook allowed.
Central Offi
ce Lines- Programming
Chapter
3
- Functions Of IPS System
