4
- Some countries do not allow the exclusion or limitation of
incidental or consequential damages or exclusions of
implied warranties. Therefore, the limitations or exclusions
herein may not apply. This warranty gives you specific legal
rights, in addition to other rights which vary from state to
state or country to country.
1 - Connect up to 6 devices
.
Connect the power cords from your devices (devices with 2
wires included) to the EX001 AC outlets.
The 4 filtered plugs ① are particularly suitable for digital
audio sources and other products that do not require a lot
of power.
The 2 unfiltered plugs ② are intended primarily for
products with high power consumption.
2 - Connect your EX001 mains power cord to the wall plug
.
Plug the power cord of the EX001 line power conditioner to
the outlet ③ standard 3 wires grounded 230V AC, 50 Hz
IEC detachable power cable is supplied with the module.
3 - Move the POWER switch to the "ON" position
.
Press the switch ④ located on the front of the EX001 until
it illuminates, indicating that power is supplied to 6 outlets.
About the direction of connection of power outlets:
.
The EX-001 is equipped with females sockets sectors to
choose the direction of connecting cables males. It is
welknown that the direction of connection may have an
effect in some cases on the quality of audio playback
devices.
To
identify
the
"best"
sense
of
connections,
you must proceed as follows:
.
1 - Disconnect your device from all other (RCA cables, HP,
etc ...)
. .
2 - Turn on the device (thus opting for one of the two
possible directions of connections).
.
3 - Measure with a voltmeter (the "alternating voltage"
position) the tension between "your hand" and " the chassis
of the device."
.
4 - Unplug the unit and plug it into the "other way".
5 - Repeat the measurement in these new conditions.
The best "position" is the one which produces the lowest
voltage.
① POWER OUTLETS - 10A FILTERED
These 4 filtered outlets are adapted to medium power
levels can supply up to 10 Amps (for a total power of
2.200W) for your digital audio sources and other products
that do not require very large power supply.
② POWER OUTLETS - 16A
These 2 unfiltered power outlets with their high power can
supply up to 16 Amps, are designed for high-power blocks.
Notes:
.
DO NOT OVERLOAD the power outlets of the EX001 power
conditioner.
The power conditioner EX001 can accept a total load of
material up to 16 A (in a stand alone plug or spread amongs
severals plugs).
Basic instructions
Quick starting guide
Warranty
Top view
Summary of Contents for EX001-EU
Page 7: ...7...