– 26 –
T R A D I T I O N A L S E R I E S S T R A I G H T M O D E L • G R E E N H O U S E I N S T R U C T I O N S
Installing Glass in the Door End
INSTALLATION
• Install the bottom row first. After setting the glass in place,
attach the Glass Caps (see sketch for length).
• The second row and each succeeding row has the same size
glass (as per sketch) but they overlap the previous row by 1/2"
and are held in place by an Alum Cap (see Side Glazing).
• Do not caulk the bottom where the glass rests on the base.
This allows for any condensation to seep out.
• The glass beside the door is pushed into the door frame. The
second row of glass sits on a plastic “ ” Came.
• Installing the Back Gable End Glass is the same as the front.
Note:
Do not be
afraid to adjust
the frame to
make it square
with the glass.
