Chapter 6: Optional Docking Station and Printer
Clinician’s Operation Manual
6-7
Choosing the Print Mode
Data can be printed in real time, numeric trend or graphic trend modes. In either trend mode,
6 days of previously stored data (depending on trend interval) collected from 1 to 99 patients
can be printed. See
Chapter 5:
Patient Record Number and Trend Data
. The printer select key sets
the printer mode in the oximeter. When a new oximeter is installed in the Docking Station, it may
have a different print format. Always check the printer format prior to pushing the start key.
Change modes by pushing the select key (
) until the desired mode is lit.
To start printing, push the print (
F
) key. The Print Mode Indicator on the printer will blink green
when printing is pending or in progress.
NOTE: The oximeter must be installed in the Docking Station to print.
NOTE: Thermal paper must be installed.
Mode
1
- Real Time Mode prints data every 5 seconds. See figure 6-7.
Figure 6-7: Sample Real Time Data Log
Mode
2
- Numeric Trend Data prints in a tabular form. See figure 6-8.
Figure 6-8: Sample Numeric Trend Data
1
2
3
REALTIME DATA
ID:001________________
hh:mm:ss SpO2 Rate PI
(%) (bpm) (%)
00:26:35 95% 75 bpm 5.4%
00:26:40 95% 75 bpm 5.6%
00:26:45 95% 75 bpm 5.4%
00:26:50 95% 75 bpm 5.6%
00:26:55 95% 75 bpm 5.6%
00:27:00 95% 75 bpm 5.6%
00:27:05 95% 75 bpm 5.6%
Title
Patient Record Number
Real time %SpO
2
, pulse
rate and PI values printed
every 5 seconds
1
2
3
TREND DATA
ID: 009________________
hh:mm:ss SpO2 Rate PI
(%) (bpm) (%)
00:11:40 96% 93 bpm 7.5%
00:11:36 96% 94 bpm 8.3%
00:11:32 96% 90 bpm 8.8%
00:11:28 96% 89 bpm 9.2%
1
2
3
Title
Patient Record Number
Trended %SpO
2
, pulse rate
and PI values printed every
4 seconds
1
2
3
Summary of Contents for 10
Page 2: ......
Page 6: ...Table of Contents iv Clinician s Operation Manual This page is intentionally left blank ...
Page 81: ......
