April 2019
– Issue 4
Page
16
of
48
Section 3 - Operating Guide (continued)
Driver’s console; switch, button and indicator functions:
3C6.1
Cruise Adjuster
：
The two switches work together to set the cruise control function. Cruise
control can without the driver having to apply the accelerator pedal, accelerate or decelerate
the vehicle at the touch of a switch; it also adjusts and maintains the same driving speed. Can
be used for speeds between
：
48km/h to 100km/h
。
Fast Idle Speed
：
Turn cruise control on and then adjust idle speed up by pushing top of switch.
Press either switch again to return to standard idle speed
3C6.2
Start-up Cruise Control:
Turn on the cruise control, and then the cruise system is ready for
setting. Press the top of the Cruise Set / Resume-Coast / Accelerate Switch when the vehicle
is at the desired speed, and then release. The vehicle will then maintain its current speed
e.g. if the switch is pressed at 80km/h, the vehicle will maintain a speed of 80km/h
3C6.2.1 Resume the last saved driving speed
：
If the driver has recently disengaged the cruise control by applying the brake pedal, pressing the “RESUME”
position of cruise set / resume-coast / accelerate switch will re-engage the cruise control and resume the last
driving speed.
3C6.2.2 Quick speed-ups:
To increase the vehicles speed, without using the accelerator, the driver simply has to press the “accelerate” of the
Cruise Set / Resume Switch. The cruise control must be turned on and the vehicles speed to be over 50km/h in
order for this function to work. Every time the “accelerate” switch is pressed or clicked the vehicles speed will
increase by 1.6km/h.
3C6.2.3 Quick speed-downs:
To decrease the vehicles speed, without using the accelerator, the driver simply has to press the “Coast” of the
Cruise Set / Resume Switch. The cruise control must be turned on & the vehicles speed to be over 50km/h in order
for this function to work. Every time the “coast” switch is pressed or clicked the vehicles speed will decrease by
1.6km/h.
Cruise controls disengage:
The cruise control will disengage as soon as you depress the brake pedal.
ATTENTION
：
PLEASE, FOR THE SAFETY OF PASSENGERS AND PERSONNEL, DO NOT DRIVE THE
VEHICLE WITH CRUISE CONTROL FOR LONG PERIODS OF TIME
3C.6.3
Engine Diagnostic switch
：
This switch is used for checking whether the engine has any problem.
(Please refer to the engine manual for further information)
Owner’s Manual
