April 2019
– Issue 4
Page
17
of
48
Section 3 - Operating Guide (continued)
3C.6 – Driver’s console switch, button and indicator functions (continued):
3C.6.4
A/C power switch:
To turn on this switch, press down the lower end; the A/C controller panel can then be operated
3C.6.5
Transmission failure alarm / Oil level alarm:
The top indicator is a transmission failure alarm and the driver MUST stop the vehicle; the bottom
indicator is an oil low warning and the oil level should be checked for continuing with journey
3C.6.6
EBS alarm (Y) / EBS failure indicator (R):
The yellow indicator when on is notification that there may be a problem and that the vehicle needs to
be taken to a service centre. When the red indicator is on, the driver MUST stop the vehicle and have
the problem resolved, before the vehicle is driven any further.
3C.6.7
ASR indicator / Disabled ramp indicator:
When the top indicator is on the ASR is on; the bottom indicator shows the disabled ramp is in an open
position.
3C.6.8
Kneeling switch:
Press down to activate the vehicle kneeling function, this lowers the vehicle to allow easy access
for passengers entering the vehicle.
3C.6.9
Vehicle body raise / lower switch:
There are three positions - high, normal and lower for the body height, which correspond with the
switch position: upper end down, middle, and lower end down.
For normal operating conditions, the
switch is set to the middle position.
3C.6.10
Kneeling reset switch:
Press down switch-the vehicle body return to the normal height
Owner’s Manual
