April 2019
– Issue 4
Page
47
of
48
Appendix - CAN instrument panel operating guide (continued)
When
the user chooses the submenu of "mileage and engine speed" from the main menu, the LCD screen will show the
result, as shown in figure 6: Mileage and engine speed information
Figure 6: Mileage and Engine speed information
The user can see the current total cumulative mileage, the trip mileage A and B, the total cumulative rotation of engine, the
engine short cumulative time and the engine cumulative time. The trip mileage A and B and the engine short cumulative time;
can be cleared / cancelled. When an item needs to be cleared, the user should use the UP-button and DOWN-button to move
the arrow to the clear position and then press & hold the LEFT-button to clear. If the clear function is not required, press the
MENU-button to quit.
When
the user chooses to enter the sub-menu for “vehicle temperature information” in the main menu, the screen display is
shown in figure 7- vehicle temperature information
Figure 7: Vehicle temperature information
The user can see the temperature values in this screen; to exit this screen press the MENU-button.
When
the user chooses to enter the sub-menu for “time set” in the main menu, the screen display is shown in figure 8: Date /
time setting
Figure 8: Date / time setting
The user chooses the position to adjust through the LEFT or the RIGHT button, after selection, the position will flash, meaning
it can be adjusted by pressing the UP or the DOWN button. When the user has finished setting, press & hold the MENU (main
menu choice) button to save and exit, if want to cancel the setting, briefly press the MENU button.
Owner’s Manual
