background image

NX260N 

 

20  

 

1.7 Connectors 

 

 

1.7.1 

Rear Panel Connectors 

 

No

 

Label

 

Function

 

Description

 

OS1 

12V DC-In Power Jack 

This power jack is connecting for 12V 
AC/DC pin 2.5mm power adapter . 12V 
40W above is recommended .       

VGA1 

VGA Connector 

This 15-pin port is for a VGA monitor or 
other VGA-compatible devices. 

3 USB01 

USB 

1&2 

connector 

These 

two 

4-pin Universal Serial Bus (USB) 

ports are available for connecting USB 
1.1/2.0 devices.

 

LAN (RJ-45) connector 

 

This port allows Gigabit connection to a 
Local Area Network (LAN) through a 
network hub. Refer to the table below for 
the LAN port LED indications. The optional 
10/100 Mbps LAN controller allows 10/100 
Mbps connection to a Local Area Network 
(LAN) through a network hub. 

 

 

4 LAN1 

SPEED LED 

ACT / LINK LED

 

Status 

Description 

Status 

Description 

OFF 10Mbps 

connection 

OFF No 

link 

Orange 100Mbps 

connection 

Green  Link 

Green 

1Gbps connection 

Blinking 

Data activity 

 

Audio 

Audio Line-out Port 

This port connects a headphone or a 
speaker. In 4-channel, 6-channel, and 
8-channel configuration, the function of this 
port becomes Front Speaker Out. 

 
 
 

1.7.2 

CPU Fan Connector (SYS_FAN) 

This connector supports 12V smart fan for onboard heat-sink. 

Summary of Contents for NX260N
























































Reviews: