How to access inside the BI250-945GSE
1.1 -Tools needed to service.
1.1.1 -#2 Philips screw driver.
1.2 –Turn off the power and disconnect the power card.
1.2.1 -Remove the flathead screw fastening the top cover to the base (Figure 1),
Figure 1- Unscrew 4 screws.
1.3
–Unscrew 4 flat head screw and lift out HDD assembly (Figure 2).
1.3.1 -Remove or add notebook HDD from or to HDD bracket (Figure 3),
Figure 2- Removal of HDD
Figure 3- Removal of HDD
ATTENTION: System Orientation
Due to fire safety reasons, the system should be oriented horizontally. If used vertically, it must be oriented in the position
intended for a VESA mount, like this:
