Pg. 3
SETTING UP YOUR QUADCOPTER DRONE:
INSTALL CAMERA
A
LANDING GEAR
PARTS
2 PC
B
PROPELLER CAGES
4 PC
D
USB CHARGING CABLE
1 PC
E
MICROSD CARD/
USB READER
1 PC
C
SPARE PROPELLERS
4 PC
4
GB
F
BATTERY
1 PC
G
CAMERA
1 PC
1 PC
H
REMOTE CONTROL
ON
1
1
2
2
Install the landing gear onto the bottom of the
quadcopter with four part 1 landing gear screws.
Install the propeller cages onto the corners of the
quadcopter with four part 2 propeller cage screws.
1. Slide the camera into the designated slot on the battery cover.
2. Open the battery cover.
3. On the underside of the battery cover, secure the camera to the battery cover with two screws.
Then close the battery cover.
4. Insert the 3-pin plug from the camera into the designated slot next to the battery cover.
1
2
3
4
